Manuals database logo
manualsdatabase
Your AI-powered manual search engine

Tait TB8100 manuals

TB8100 first page preview

TB8100

Brand: Tait | Category: Accessories
Table of contents
  1. contact information
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Preface
  6. Associated Documentation
  7. Publication Record
  8. Description
  9. Functional Description
  10. Figure 1.1 High level block diagram
  11. Mechanical Description
  12. Mechanical Assembly
  13. Connections and Controls
  14. Rear Panel
  15. Figure 1.5 Connecting one 1PPS TTL output to multiple TB9100 base stations
  16. Back-up Battery
  17. Operation
  18. System Start-up and Shutdown
  19. Oscillator Control
  20. Invalid GPS Reference
  21. GPS Fix Acquisition Times
  22. Alarms
  23. PPS Outputs
  24. Programming
  25. Installing the Software
  26. Setting Up the Satsync 7 Module
  27. Viewing the Data Log
  28. Viewing the GPS Status
  29. Upgrading the Satsync 7 Firmware
  30. System Configuration
  31. Setting the Links on the System Interface Board
  32. Figure 4.1 Location of links on the system interface board
  33. T801-4 with Internal GPS Receiver
  34. T801-4 with External GPS Receiver
  35. T801-4 with Internal and External GPS Receivers
  36. Figure 4.4 Connecting the T801-4 to a GPS antenna and external GPS receiver
  37. Connection and Configuration
  38. Alarms and Monitoring
  39. Installation
  40. Personal Safety
  41. Equipment Safety
  42. Regulatory Information
  43. Environmental Conditions
  44. Recommended Tools
  45. Cabling
  46. Disposal of Packaging
  47. Accessories
  48. Specifications
  49. Tait General Software Licence Agreement
  50. limited warranty
  51. Directive 1999/5/EC Declaration of Conformity
  52. Chinese RoHS Compliance Information
TB8100 first page preview

TB8100

Brand: Tait | Category: Test Equipment
Table of contents
  1. Table Of Contents
  2. Preface
  3. Document Conventions
  4. Publication Record
  5. Introduction
  6. Modification History
  7. Using the CTU with a TB7100
  8. Using the CTU with a TB8100
  9. Using the CTU with a TB9100
  10. Appendix A - CTU Accessories
  11. Appendix B - CTU Block Diagram
TB8100 first page preview

TB8100

Brand: Tait | Category: Accessories
Table of contents
  1. contact information
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Issue
  8. Introduction
  9. From T800 to TB8100
  10. Operation Modes
  11. Channels
  12. Profiles
  13. Subaudible Signalling
  14. Power Saving
  15. Task Manager
  16. Tasks and Comments
  17. Custom Inputs and Actions
  18. Remote Connections
  19. Alarms
  20. System Interface
  21. Software Feature Enabler
  22. Getting Started
  23. Connecting and Logging On
  24. Monitoring Alarms
  25. Monitoring the Base Station
  26. Viewing Configuration Settings
  27. Diagnosing Problems
  28. Configuration Tutorial
  29. Step 3: Read the Base Station's Configuration
  30. Step 5: Configure a Channel
  31. Basic Tasks
  32. Using the Service Kit
  33. Status Bar
  34. Setting Service Kit Options
  35. Setting Up and Configuring Connections
  36. Adding a Connection
  37. Adding a Modem Dialup Connection
  38. Adding a Connection That Uses a Port Switch
  39. Adding a Network Connection
  40. Copying a connection
  41. Export and Import of Service Kit Connections
  42. Exporting Connections
  43. Connecting to a Base Station
  44. Connecting via Ethernet
  45. Logging On
  46. Logon Details
  47. Changing Base Station Mode
  48. Working With Base Station Configurations
  49. Creating a New Configuration
  50. Saving a Configuration
  51. Creating a Configuration Template
  52. Changing Base Station Passwords
  53. Access Profiles
  54. Modifying Access Profiles
  55. Working with Dual-Channel & Multi-Reciter Subracks
  56. Working with Different Versions
  57. Service Kit Handling of Older Versions
  58. Upgrading Base Station Firmware
  59. Working with the Software Feature Enabler
  60. Disabling a Feature Set
  61. Disabling the Power Saving Modes Feature Set
  62. Monitoring
  63. Module Details
  64. Versions
  66. Inputs
  67. Operational Information
  68. Current Source
  69. Monitoring the Reciter
  70. Monitoring the Power Amplifier
  71. Monitoring the Power Management Unit
  72. Configuring the Base Station
  73. Choosing a Configuration
  74. Configuring General Options
  75. Configuring the System Interface
  76. Configuring External Channel Selection
  77. Configuring RSSI Output
  78. Converting Between Microvolts and dBm
  79. Configuring Fan Control
  80. Select fan type
  81. Configuring Miscellaneous Items
  82. Minimum battery voltage
  83. CTCSS characteristics
  84. External clock reference frequency
  85. Printing a Base Station Configuration
  86. Configuring Channels
  87. Getting Started with Channels
  88. Customizing the Default Channel Profile
  89. Customizing the Default Signalling Profile
  90. Using Advanced Profile Features
  91. Working with Channel Profiles
  92. Configuring Receiver Gating
  93. Configuring Power Saving
  94. Editing a Channel Profile
  95. Receiver Gating
  96. Signal Path
  98. CWID System
  100. Tone On Idle
  101. Working with Signalling Profiles
  102. Setting Up a Reminder Tone
  103. Editing a Signalling Profile
  104. Tx Timers
  105. Advanced
  107. Working With the Channel Table
  108. Buttons
  109. Editing a Channel (Default Profiles)
  110. Adding and Copying Channels
  111. Importing Channels
  112. Selecting a Channel
  113. Printing Channel Data
  116. Reciter
  117. Power Amplifier
  118. System
  119. Power Management Unit
  120. Viewing Recent Alarms
  121. Disabling Unwanted Alarms
  122. Altering Alarm Thresholds
  123. Notifying Alarms
  124. Notifying Over the Line
  125. Configuring Alarm Center Communications
  126. Configuring Port Switch Commands and Responses
  127. Configuring Email Messaging
  128. Configuring Syslog Communications
  129. Diagnosing
  130. Carrying Out Diagnostic Tests
  131. System Tests
  132. Reciter Tests
  133. Testing Receiver Sensitivity
  134. Determining Synthesiser Lock Ranges
  135. Audio I/O Tests
  136. Generating an Audio Output
  137. Testing Hardware Channel Selection
  138. Testing the Rx Gate Output
  139. Testing Digital Inputs
  140. Power Amplifier Tests
  141. Testing the Fan
  142. Power Management Unit Tests
  143. Testing the PMU fault LED
  144. Viewing Additional Details
  146. Accessing Task Manager
  147. Working With Task Manager
  148. Adding a Task
  149. Adding a Comment
  150. Importing Tasks
  151. Task Manager Inputs and Actions
  152. Channel Profile Inputs
  153. Signalling Profile Inputs
  154. System I/O
  155. Alarm Inputs
  156. Custom Inputs
  157. Channel Profile Actions
  158. Signalling Profile Actions
  160. Alarm
  161. Custom Actions
  162. Customizing Task Manager
  163. Defining a Custom Input
  164. Viewing a Custom Action
  165. Defining Counters, Timers, and Flags
  166. Monitoring Task Manager
  167. Monitoring Recent Actions
  168. Glossary
  169. Index
  170. Tait General Software Licence Agreement
TB8100 first page preview

TB8100

Brand: Tait | Category: Accessories
Table of contents
  1. contact information
  2. Table Of Contents
  3. Installation
  4. Equipment Safety
  5. Regulatory Information
  6. Environmental Conditions
  7. Grounding and Lightning Protection
  8. Ventilation
  9. Installing the Base Station
  10. Connection
  11. RF Connections
  12. System Connections
  13. Service Kit Connections
  14. V PA Power Saving Control Connection
TB8100 first page preview

TB8100

Brand: Tait | Category: Accessories
Table of contents
  1. calibration kit
  2. Table Of Contents
  3. Table Of Contents
  4. About TB8100 Calibration Kit
  5. About the Toolbar
  6. Basic Tasks
  7. Reciter Tuning Holes
  8. Configuring TB8100 Calibration Kit
  9. Connecting to the Reciter Outside the Subrack
  10. Connecting to the Reciter/PA in the Subrack
  11. Disconnecting from the Base Station/Reciter
  12. Adjusting the Frequency Setup
  13. Tuning the Receiver
  14. Adjusting the Exciter Lock Band
  15. Calibrating the Reciter
  16. Calibrating the VCO Modulation
  17. Calibrating the RSSI
  18. Audio Calibration
  19. Calibrating the Unbalanced Lines
  20. Calibrating the TCXO
  21. Calibrating the Power Amplifier
  22. Calibrating the PA Power
  23. Troubleshooting Tips
  24. Index
TB8100 first page preview

TB8100

Brand: Tait | Category: Accessories
Table of contents
  1. getting started
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Introduction
  7. From T800 to TB8100
  8. Operation Modes
  9. Channels
  10. Profiles
  11. Subaudible Signalling
  12. Power Saving
  13. Task Manager
  14. Tasks and Comments
  15. Custom Inputs and Actions
  16. remote connections
  17. Alarms
  18. System Interface
  19. Software Feature Enabler
  20. Getting Started
  21. Connecting and Logging On
  22. Monitoring Alarms
  23. Monitoring the Base Station
  24. Viewing Configuration Settings
  25. Diagnosing Problems
  26. Configuration Tutorial
  27. Step 3: Read the Base Station's Configuration
  28. Step 5: Configure a Channel
  29. Basic Tasks
  30. Using the Service Kit
  31. status bar
  32. Setting Service Kit Options
  33. Setting Up and Configuring Connections
  34. Adding a Modem Dialup Connection
  35. Adding an Over-the-Air Connection
  36. Editing a Connection
  37. Connecting to a Base Station System
  38. Logging On to a Base Station
  39. Logon Details
  40. Changing Base Station Mode
  41. Working With Base Station Configurations
  42. Creating a New Configuration
  43. Saving a Configuration
  44. Creating a Configuration Template
  45. Changing Base Station Passwords
  46. Logging Off and Disconnecting
  47. Upgrading Base Station Firmware
  48. Upgrading the Service Kit
  49. Working with the Software Feature Enabler
  50. Disabling a Feature Set
  51. Disabling the Power Saving Modes Feature Set
  52. Monitoring
  53. Module Details
  54. Versions
  56. Inputs
  57. Operational Information
  58. Current Source
  59. Monitoring the Reciter
  60. Monitoring the Power Amplifier
  61. Monitoring the Power Management Unit
  62. Viewing System Data
  63. Power Amplifier Data
  64. Configuring the Base Station
  65. Choosing a Configuration
  66. Configuring General Options
  67. Configuring the System Interface
  68. Configuring RSSI Output
  69. Converting Between Microvolts and dBm
  70. Configuring Miscellaneous Items
  71. Minimum battery voltage
  72. Select external clock reference frequency (if fitted)
  73. Defining Access Profiles
  74. Printing a Base Station Configuration
  75. Configuring Channels
  76. Getting Started with Channels
  77. Customizing the Default Channel Profile
  78. Customizing the Default Signalling Profile
  79. Using Advanced Profile Features
  80. Working with Channel Profiles
  81. Configuring Receiver Gating
  82. Editing a Channel Profile
  83. General
  84. Signal Path
  86. CWID System
  88. Working with Signalling Profiles
  89. Setting Up a Reminder Tone
  91. Tx Timers
  92. Advanced
  94. Working With the Channel Table
  95. Buttons
  96. Editing a Channel (Default Profiles)
  97. Adding and Copying Channels
  98. Importing Channels
  99. selecting a channel
  100. Printing Channel Data
  103. Reciter
  104. Power Amplifier
  105. System
  106. Power Management Unit
  107. Viewing Recent Alarms
  108. Disabling Unwanted Alarms
  109. Altering Alarm Thresholds
  110. Notifying Alarms
  111. Notifying Over the Line
  112. Configuring Alarm Center Communications
  113. Configuring Email Messaging
  114. Diagnosing
  115. Carrying Out Diagnostic Tests
  116. System Tests
  117. Control Panel Tests
  118. Reciter Tests
  119. Testing Receiver Sensitivity
  120. Determining Synthesiser Lock Ranges
  121. Audio I/O Tests
  122. Generating an Audio Output
  123. Testing Digital Outputs
  124. Testing Hardware Channel Selection
  125. Sending a Test Email
  126. Detecting Subaudible Signalling
  127. Power Amplifier Tests
  128. Testing the Fan
  129. Power Management Unit Tests
  130. Testing the PMU fault LED
  131. Viewing Additional Details
  133. Accessing Task Manager
  134. Working With Task Manager
  135. Adding a Task
  136. Adding a Comment
  137. Importing Tasks
  138. Task Manager Inputs and Actions
  139. Channel Profile Inputs
  140. Signalling Profile Inputs
  141. System I/O
  142. Alarm Inputs
  143. Custom Inputs
  144. Channel Profile Actions
  145. Signalling Profile Actions
  146. Alarm
  147. Custom Actions
  148. Task Manager Examples
  149. Base Station with Automatic Charging
  150. Base Station with Auxiliary Antenna
  151. simplex operation
  152. Cancel Alarms Pin
  153. Customizing Task Manager
  154. Defining a Custom Input
  155. Viewing a Custom Action
  156. Monitoring Task Manager
  157. Monitoring Recent Actions
  158. Glossary
  159. Index
TB8100 first page preview

TB8100

Brand: Tait | Category: Accessories
Table of contents
  1. Issue
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Tait Electronics Limited September
  8. Preface
  9. Associated Documentation
  10. Publication Record
  11. Safety and Servicing Information
  12. Explosive Environments
  13. Equipment Safety
  14. Regulatory Information
  15. General Servicing Information
  16. Website Access
  17. PCB Information
  18. Recommended Tools
  19. Identifying Screw Types
  20. Replacing Components
  21. Cased Mica Capacitors
  22. Reciter Circuit Description
  23. Digital Circuitry
  24. Digital Signal Processor (DSP)
  25. Reduced Instruction Set Computer (RISC)
  26. MHz Digital Clock
  27. VCXO
  28. Receiver RF Circuitry - VHF Reciter
  29. Synthesizer
  30. Receiver RF Circuitry - UHF Reciter
  31. Mixer
  32. AGC (H Band Only)
  33. Exciter RF Circuitry
  35. VCO - VHF Reciter
  36. VCO - UHF Reciter
  37. Exciter Control Circuit
  38. System Interface Boards
  39. Power Supply
  40. Reciter Fault Finding
  41. Identifying the Reciter
  42. Test Equipment
  43. Software and Firmware Compatibility
  44. Board Replacement
  45. Initial Checks
  46. Visual Inspection
  47. Digital IF
  48. Receiver
  49. Exciter
  50. Audio
  51. Final Tasks
  52. Reciter Disassembly and Reassembly
  53. Screw Torque Settings
  55. Refitting the Front and Rear Panels
  56. Reciter Board Replacement
  57. Replacing the System Interface Board
  58. Reciter Spare Parts
  59. Power Amplifier Circuit Description
  60. Microprocessor Control Circuitry
  61. PA-Key
  62. Shutdown
  63. Fan Control
  64. Ambient Air Temperature Sensor
  65. Low Pass Filter and Directional Coupler Board
  66. Boost Regulator Circuitry (12V PA Only)
  67. Power Amplifier Fault Finding
  68. Safety Precautions
  69. Identifying the PA
  75. Control Board
  76. W Board
  77. Splitter and Combiner Boards (100W PA Only)
  80. Boost Regulator Board (12V PA Only)
  82. Power Amplifier Disassembly and Reassembly
  84. Removing the Front Panel
  85. Refitting the Front Panel
  86. Power Amplifier Board Replacement
  87. Circuit Board Connecting Links
  88. Replacing the 60W Board
  89. Replacing the 60W RF Power Transistor
  90. Replacing the Control Board
  91. Replacing the Low Pass Filter/Directional Coupler Board
  92. Replacing the Splitter/Combiner Boards
  93. Replacing the Interconnect Boards
  94. Replacing the Boost Regulator Board in a 12V PA
  95. Power Amplifier Spare Parts
  96. Power Management Unit Circuit Description
  98. AC Module
  99. DC Module
  100. Power Management Unit Fault Finding
  102. Identifying the PMU
  107. Auxiliary Power Supply Board
  109. DC Converter with Microprocessor Control
  111. PMU Operation on DC Input
  113. Modifying the PFC Control Card
  115. Power Management Unit Disassembly and Reassembly
  117. Mechanical Overview
  119. Removing the Front and Rear Panels
  120. Disconnecting the AC and DC Modules
  122. Refitting the Top and Bottom Covers
  123. Power Management Unit Card and Board Replacement
  125. Replacing the Plug-in Cards
  126. Replacing the Auxiliary Power Supply Board
  127. Power Management Unit Spare Parts
  128. Control Panel Circuit Description
  129. Control Circuitry
  130. Power Save
  131. Control Panel Servicing
  132. Identifying the Control Panel
  133. Replacing the Circuit Board
  134. Replacing the Speaker
  135. Spare Parts
  136. important notice
  137. limited warranty
TB8100 first page preview

TB8100

Brand: Tait | Category: Accessories
Table of contents
  1. Table Of Contents
  2. Installation
  3. Equipment Safety
  4. Regulatory Information
  5. Issue
  6. Grounding and Lightning Protection
  7. Ventilation
  8. Installing the Base Station System
  9. Connection
  10. V PA Power Saving Control Connection
  11. System Connections
  12. Service Kit Connections
  13. RF Connections
  14. Tait Electronics Limited June
TB8100 first page preview

TB8100

Brand: Tait | Category: Accessories
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Preface
  5. Document Conventions
  6. Publication Record
  7. Description
  8. The TB8100 BSS Modules
  9. Mechanical Assembly
  10. Circuit Description
  11. Reciter
  12. Control Panel
  13. Operating Controls
  15. Dual Base Station Control Panel
  16. Power Save Control Panel
  18. Functional Description
  19. Base Station System Overview
  20. Single and Dual 12V PA Base Station Systems
  21. System Control Bus
  22. Signal Path
  23. Power Distribution
  24. PMU Operation on DC Input
  25. Data, Control and Monitoring Paths
  26. Fan Operation
  27. Power Saving
  28. Power Saving Measures
  29. Power Saving Modes
  30. Overview of Operation
  31. Using the Service Kit with Power Save Base Stations
  32. Configuring Receiver Gating for Base Stations with Power Save
  33. Installation
  34. Proximity to RF Transmissions
  35. Antenna Load
  36. Health, Safety and Electromagnetic Compatibility in Europe
  37. Grounding and Lightning Protection
  38. Ventilation
  39. Installing the Base Station System
  40. Mounting the Subrack
  41. Auxiliary Support Bracket
  42. Optional Slide Mounting Rails
  43. Replacing Modules
  44. Preliminary Disassembly
  45. Replacing the Control Panel
  46. Tait Electronics Limited June
  47. Replacing the Power Amplifier
  48. Replacing the Power Management Unit
  49. Replacing the Front Panel Fans
  50. Replacing the Module Guide Rails
  51. Replacing the Subrack Interconnect Board
  52. Final Reassembly
  53. Connection
  54. Power Supply Connections
  55. Auxiliary DC Power
  56. RF Connections
  57. System Connections
  58. Digital Interface
  59. System Interface Connections
  60. Service Kit Connections
  61. Microphone Connection
  62. Preparation for Operation
  63. Applying Power
  64. Test Transmissions
  65. Maintenance Guide
  66. Glossary
  67. Tait General Software Licence Agreement
  68. limited warranty
  69. Directive 1999/5/EC Declaration of Conformity
  70. 4 TB8100 Installation and Operation Manual
TB8100 first page preview

TB8100

Brand: Tait | Category: Accessories
Table of contents
  1. related documentation
TB8100 first page preview

TB8100

Brand: Tait | Category: Accessories
Table of contents
  1. calibration kit
  2. contact information
  3. Table Of Contents
  4. Issue
  5. Basic Tasks
  6. About the Toolbar
  7. Equipment Required
  8. Field Calibration
  9. Selecting the Communications Port
  10. Connecting to a Reciter via the Control Panel
  11. Troubleshooting
  12. Adjusting the Frequency Setup
  13. Tuning a UHF Receiver Front End
  14. Tuning a VHF Receiver Front End
  15. Adjusting the Exciter Lock Band
  16. Selecting the Exciter Sub-band
  17. Calibrating the Reciter
  18. Calibrating the VCO
  19. Calibrating the RSSI
  20. Audio Calibration
  21. Calibrating the Unbalanced Lines
  22. Calibrating the Power Amplifier
  23. Calibrating the PA Power
  24. Troubleshooting Tips
  25. Calibrating the Power Management Unit
  26. limited warranty
  27. Index
TB8100 first page preview

TB8100

Brand: Tait | Category: Accessories
Table of contents
  1. Table Of Contents
  2. Installation
  3. Equipment Safety
  4. Regulatory Information
  5. Grounding and Lightning Protection
  6. Ventilation
  7. Installing the Base Station System
  8. Connection
  9. System Connections
  10. Service Kit Connections
  11. Tait Contact Information
TB8100 first page preview

TB8100

Brand: Tait | Category: Accessories
TB8100 first page preview

TB8100

Brand: Tait | Category: Repeater
Related products
TB9100TB7100TB8000TB9300TB7000TB9000TB7200TB7300TB9400T800 - 25 - 0000
Tait categories
Two-Way Radio
Accessories
Radio
Portable Radio
Test Equipment
Power Supply
Transceiver
Repeater
Microphone
Receiver
More Tait categories
Manuals database logo
manualsdatabase
Your AI-powered manual search engine