Command Manual (For Soliton) – IPv6 ManagementH3C S3100 Series Ethernet Switches Chapter 1 IPv6 Configuration Commands1-21Table 1-13 Description on the fields of the display udp ipv6 statistics commandField DescriptionTotal Total number of received/sent packetschecksum error Total number of packets with an invalidchecksumshorter than headerTotal number of IPv6 UDP packets whose totallength is less than that specified by the packetheaderdata length larger than packet Total number of packets whose data lengthexceeds that specified by the packet headerunicast(no socket on port) Total number of received unicast packetswithout any socket on a portbroadcast/multicast(no socket onport)Total number of received broadcast/multicastpackets without any socket on a portnot delivered, input socket full Number of packets not handled because of thereceiving buffer being fullinput packet missing pcb cache Number of packets that do not match any entryin the PCB cache1.1.13 dns server ipv6Syntaxdns server ipv6 ipv6-address [ interface-type interface-number ]undo dns server ipv6 ipv6-address [ interface-type interface-number ]ViewVLAN interface viewParametersipv6-address: IPv6 address of a DNS server.interface-type interface-number: Interface type and interface number. It is requiredwhen the IPv6 address of the specified DNS server is a link-local address.DescriptionUse the dns server ipv6 command to configure an IPv6 address for a DNS server.Use the undo dns server ipv6 command to remove the configured DNS server.By default, no DNS server is configured.
