Command Manual (For Soliton) – 802.1x-System GuardH3C S3100 Series Ethernet Switches Chapter 1 802.1x Configuration Commands1-12interface-list: Ethernet port list, in the form of interface-list= { interface-typeinterface-number [ to interface-type interface-number ] } &<1-10>, in whichinterface-type specifies the type of an Ethernet port and interface-number is thenumber of the port. The string “&<1-10>” means that up to 10 port lists can be provided.DescriptionUse the dot1x max-user command to set the maximum number of users an Ethernetport can accommodate.Use the undo dot1x max-user command to revert to the default maximum usernumber.By default, a port can accommodate up to 256 users.In system view:z If you do not provide the interface-list argument, these two commands apply to allthe ports of the switch.z If you specify the interface-list argument, these two commands apply to thespecified ports.In Ethernet port view, the interface-list argument is not available and the commandsapply to only the current port.Related command: display dot1x.Example# Configure the maximum number of users that Ethernet1/01 port can accommodate tobe 32. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] dot1x max-user 32 interface Ethernet 1/0/11.1.9 dot1x port-controlSyntaxdot1x port-control { auto | authorized-force | unauthorized-force } [ interfaceinterface-list ]undo dot1x port-control [ interface interface-list ]ViewSystem view, Ethernet port viewParameterauto: Specifies to operate in auto access control mode. When a port operates in thismode, all the unauthenticated hosts connected to it are unauthorized. In this case, only
