Command Manual (For Soliton) – Information CenterH3C S3100 Series Ethernet SwitchesChapter 1 Information Center ConfigurationCommands1-71.1.6 info-center channel nameSyntaxinfo-center channel channel-number name channel-nameundo info-center channel channel-numberViewSystem viewParameterchannel-number: Channel number, ranging from 0 to 9, corresponding to the 10channels of the system.channel-name: Channel name, up to 30 characters in length. The name must start withan English letter, containing no special character but numbers and English letters only.DescriptionUse the info-center channel name command to name the channel whose number ischannel-number as channel-name.Use the undo info-center channel command to restore the default name of thechannel whose number is channel-number.By default, the name of channel 0 to channel 9 is (in turn) console, monitor, loghost,trapbuffer, logbuffer, snmpagent, channel6, channel7, channel8, channel9.Do not configure two different channels with the same name.Example# Name channel 0 as “execconsole”. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] info-center channel 0 name execconsole1.1.7 info-center console channelSyntaxinfo-center console channel { channel-number | channel-name }undo info-center console channelViewSystem view
