Command Manual (For Soliton) – AAAH3C S3100 Series Ethernet Switches Chapter 1 AAA Configuration Commands1-62Related commands: radius scheme, retry.Examples# Set the timeout time of the response timeout timer for RADIUS scheme radius1 to 5seconds. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] radius scheme radius1New Radius scheme[Sysname-radius-radius1] timer 51.2.30 timer quietSyntaxtimer quiet minutesundo timer quietViewRADIUS scheme viewParametersminutes: Wait time before primary server state restoration, ranging from 1 to 255minutes.DescriptionUse the timer quiet command to set the time that the switch waits before it tries tore-communicate with the primary server and restore the status of the primary server toactive.Use the undo timer quiet command to restore the default wait time.By default, the switch waits five minutes.Related commands: display radius scheme.Examples# Configure the switch to wait 10 minutes before it tries to restore the status of theprimary server to active. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] radius scheme radius1New Radius scheme[Sysname-radius-radius1] timer quiet 10
