Command Manual (For Soliton) – Information CenterH3C S3100 Series Ethernet SwitchesChapter 1 Information Center ConfigurationCommands1-3Table 1-1 Description on the fields of the display info-center commandField DescriptionInformation Center Status of the information center: enabled/disabledLog hostInformation about the log host, including its IP address,name and number of information channel, language andlevel of the log hostConsole Information about the console port, including name andnumber of its information channelMonitor Information about the monitor port, including name andnumber of its information channelSNMP Agent Information about SNMP Agent, including name and numberof its information channelLog bufferInformation about the log buffer, including its state (enabledor disabled), its maximum size, current size, currentmessages, information channel name and number, numberof dropped messages, and number of overwritten messagesTrap bufferInformation about the trap buffer, including its state (enabledor disabled), maximum size, current size, current messages,channel number and name, number of dropped messages,and number of overwritten messagesInformationtimestamp setting:Information about the time stamp setting, showing the timestamp format of the log, trap and debugging information1.1.3 display logbufferSyntaxdisplay logbuffer [ unit unit-id ] [ level severity | size buffersize ]* [ | { begin | exclude| include } regular-expression ]ViewAny viewParameterunit-id: Unit ID of the device, the value can only be 1.level severity: Specifies an information severity level. The severity argument rangesfrom 1 to 8.
