Command Manual (For Soliton) – QoS-QoS ProfileH3C S3100 Series Ethernet Switches Chapter 1 QoS Commands1-30DescriptionUse the reset traffic-limit vlan command to clear the statistics on packets of a VLAN.Related command: traffic-limit vlan.Example# Clear the statistics on packets that match ACL 2000 and are of VLAN 1. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] reset traffic-limit vlan 1 inbound ip-group 20001.1.28 reset traffic-statisticSyntaxreset traffic-statistic inbound acl-ruleViewSystem view, Ethernet port view, Port group viewParameterinbound: Specifies to clear the statistics on the inbound packets.acl-rule: ACL rules to be applied. This argument can be the combination of multipleACLs. For more information about this argument, refer to Table 1-8 and Table 1-9.DescriptionUse the reset traffic-statistics command to clear the statistics on all the packetsmatching specific ACL rules, or the packets that match specific ACL rules and are of aport group or pass a port.Related command: traffic-statistic.Example# Clear the statistics on packets matching ACL 2000 and passing Ethernet 1/0/1. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] interface Ethernet1/0/1[Sysname-Ethernet1/0/1] reset traffic-statistic inbound ip-group 20001.1.29 reset traffic-statistic vlanSyntaxreset traffic-statistic vlan vlan-id inbound acl-rule
