Command Manual ( For Soliton ) – Port Security-Port BindingH3C S3100 Series Ethernet Switches Chapter 1 Port Security Commands1-61.1.3 mac-address securitySyntaxIn system view:mac-address security mac-address interface interface-type interface-number vlanvlan-idundo mac-address security [ [ mac-address [ interface interface-typeinterface-number ] ] vlan vlan-id ]In Ethernet port view:mac-address security mac-address vlan vlan-idundo mac-address security [ [ mac-address ] vlan vlan-id ]ViewSystem view, Ethernet port viewParametersmac-address: Security MAC address, in the H-H-H format.interface interface-type interface-number: Specify the port on which the security MACaddress is to be added. The interface-type interface-number arguments indicate theport type and port number.vlan vlan-id: Specify the VLAN to which the MAC address belongs. The vlan-idargument specifies a VLAN ID in the range 1 to 4094.DescriptionUse the mac-address security command to create a security MAC address entry.Use the undo mac-address security command to remove a security MAC address.By default, no security MAC address entry is configured.Note:z The mac-address security command can be configured successfully only whenport security is enabled and the security mode is autolearn.z To create a security MAC address entry successfully, you must make sure that thespecified VLAN is carried on the specified port.
