Command Manual (For Soliton) – AAAH3C S3100 Series Ethernet Switches Chapter 1 AAA Configuration Commands1-51ViewSystem viewParametersauthentication-server-down: Enables/disables the switch to send trap messageswhen a RADIUS authentication server turns down.accounting-server-down: Enables/disables the switch to send trap messages when aRADIUS accounting server turns down.DescriptionUse the radius trap command to enable the switch to send trap messages when aRADIUS server turns down.Use the undo radius trap command to disable the switch from sending trap messageswhen a RADIUS authentication server or a RADIUS accounting server turns down.By default, this function is disabled.This configuration takes effect on all RADIUS scheme.Note:The switch considers a RADIUS server as being down if it has tried the configuredmaximum number of times to send a message to the RADIUS server but does notreceive any response.Examples# Enable the switch to send trap messages when a RADIUS authentication server turnsdown. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] radius trap authentication-server-down1.2.19 reset radius statisticsSyntaxreset radius statisticsViewUser view
