Command Manual (For Soliton) – 802.1x-System GuardH3C S3100 Series Ethernet Switches Chapter 1 802.1x Configuration Commands1-10ViewSystem viewParameterNoneDescriptionUse the dot1x handshake enable command to enable the online user handshakingfunction.Use the undo dot1x handshake enable command to disable the online userhandshaking function.By default, the online user handshaking function is enabled.Caution:z To enable the proxy detecting function, you need to enable the online userhandshaking function first.z Handshaking packets need the support of the H3C-proprietary client. They are usedto test whether or not a user is online.z As clients that are not of H3C do not support the online user handshaking function,switches cannot receive handshaking acknowledgement packets from them inhandshaking periods. To prevent users being falsely considered offline, you need todisable the online user handshaking function in this case.Example# Enable the online user handshaking function. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] dot1x handshake enable1.1.7 dot1x handshake secureSyntaxdot1x handshake secureundo dot1x handshake secureViewEthernet port view
