Command Manual ( For Soliton ) – Port Security-Port BindingH3C S3100 Series Ethernet Switches Chapter 1 Port Security Commands1-11Note:You can bring up a port that has been permanently disabled by running the undoshutdown command or disabling port security on the port.1.1.6 port-security authorization ignoreSyntaxport-security authorization ignoreundo port-security authorization ignoreViewEthernet port viewParametersNoneDescriptionUse the port-security authorization ignore command to configure the port to ignorethe authorization information delivered by the RADIUS server.Use the undo port-security authorization ignore command to restore the defaultconfiguration.By default, the port uses (does not ignore) the authorization information delivered bythe RADIUS server.You can use the display port-security command to check whether the port will use theauthorization information delivered by the RADIUS server.Note:After a RADIUS user passes authentication, the RADIUS server authorizes theattributes configured for the user account such as the dynamic VLAN configuration. Formore information, refer to AAA Command.Examples# Configure Ethernet 1/0/2 to ignore the authorization information delivered by theRADIUS server. system-view
