Command Manual (For Soliton) – MulticastH3C S3100 Series Ethernet SwitchesChapter 2 Common Multicast ConfigurationCommands2-1Chapter 2 Common Multicast ConfigurationCommands2.1 Common Multicast Configuration Commands2.1.1 display mac-address multicast staticSyntaxdisplay mac-address multicast static [ [ mac-address ] vlan vlan-id ] [ count ]ViewAny viewParametersmac-address: Displays the static multicast MAC entry information for the specifiedMAC address. Without this argument provided, this command displays the informationof all static multicast MAC entries in the specified VLAN.vlan vlan-id: Displays the static multicast MAC entry information in the specified VLAN.Without a VLAN specified, this command displays the static multicast MAC entryinformation in all VLANs.count: Displays the number of static multicast MAC entries.DescriptionUse the display mac-address multicast static command to display the informationabout the multicast MAC address entry or entries manually configured on the switch.Related commands: mac-address multicast interface, mac-address multicastvlan.Examples# Display the information of all static multicast MAC entries in VLAN 1. display mac-address multicast static vlan 1MAC ADDR VLAN ID STATE PORT INDEX AGING TIME(s)0100-0001-0001 1 Config static Ethernet1/0/1 NOAGEDEthernet1/0/2Ethernet1/0/3Ethernet1/0/4--- 1 static mac address(es) found ---
