Command Manual (For Soliton) – Port Basic ConfigurationH3C S3100 Series Ethernet SwitchesChapter 1 Port Basic ConfigurationCommands1-37all: Cancels all the storm control threshold configurations on the port.DescriptionUse the storm-constrain command to set the upper and lower thresholds of thebroadcast/multicast/unicast traffic received on the port.Use the undo storm-constrain command to cancel the threshold configuration.Related commands: display storm-constrain.Examples# Set the upper and lower thresholds of broadcast traffic on Ethernet 1/0/1 to 100 ppsand 10 pps respectively. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] interface Ethernet 1/0/1[Sysname-Ethernet1/0/1] storm-constrain broadcast 100 10 pps1.1.33 storm-constrain controlSyntaxstorm-constrain control { block | shutdown }undo storm-constrain controlViewEthernet port viewParametersblock: Blocks and stops forwarding those types of traffic exceeding the upperthresholds.shutdown: Shutdowns the port if the broadcast/multicast/unicast traffic exceeds theupper threshold, and stops receiving and forwarding all types of traffic on the port.DescriptionUse the storm-constrain control command to set the action to be taken when thebroadcast/multicast/unicast traffic on the port exceeds the upper threshold.Use the undo storm-constrain control command to cancel the configured action.By default, no action is taken.
