Command Manual (For Soliton) – Stack-ClusterH3C S3100 Series Ethernet SwitchesChapter 2 HGMP V2 ConfigurationCommands2-4900e0-fd34-bc66 000f-e202-2180 Ethernet1/0/1Table 2-11 Description on the fields of the display cluster black-list commandField DescriptionDevice ID ID of the device in the blacklist, expressed by the MAC addressof the deviceAccess Device ID ID of the device (in the cluster) that is connected with a devicein the blacklist, expressed by the MAC address of the deviceAccess port Port (in the cluster) that is connected with a device in theblacklist2.4.5 display cluster current-topologySyntaxdisplay cluster current-topology [ mac-address mac-address1 [ to-mac-addressmac-address2 ] | member-id member-id1 [ to-member-id member-id2 ] ]ViewAny viewParametersmac-address mac-address1: Displays the topology structure three layers above orbelow the node specified by the MAC address. If to-mac-address is specified,mac-address1 is the start point of the route in the specified route topology displayed.to-mac-address mac-address2: Displays the topology structure of the route frommac-address1 to mac-address2.member-id member-id1: Displays the structure of the standard topology three layersabove or below the node specified by the member ID. If to-member-id is specified,member-id1 is the start point of the route in the specified route topology displayed.to-member-id member-id2: Displays the topology structure of the route frommember-id1 to member-id2.DescriptionUse the display cluster current-topology command to display the topology of thecurrent cluster.If to-mac-address or to-member-id is not specified, the system displays the topologystructure three layers below the node specified by the MAC address or member ID.
