Command Manual (For Soliton) – System Maintenance and DebuggingH3C S3100 Series Ethernet SwitchesChapter 3 Device ManagementCommands3-19Example# Disable real-time monitoring of the running status of the system. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] undo system-monitor enable3.1.18 xmodem getSyntaxxmodem get { file-url | device-name }ViewUser viewParameterfile-url: Path plus name of a host software file in the Flash, a string of 1 to 64 characters.device-name: File name, in the form of unit[NO.]>flash:, which is used to indicate thatthe specified file is stored in the Flash of a specified switch.DescriptionUse the xmodem get command to download files from the local device connected withthe Console port of a switch through XModem. This command can be configured onlywhen the device logging onto a switch through the Console port.Note that, the communication parameter settings of the Console port of the switch andthose of the serial port of the local device must be consistent and, the interface type ofthe Console port must be AUX.Example# Download files through XModem. xmodem get flash:/config.cfg**** WARNING ****xmodem is a slow transfer protocol limited to the current speed settings ofthe auxiliary ports.During the course of the download no exec input/output will be available!---- ******* ----
