Command Manual (For Soliton) – MSTPH3C S3100 Series Ethernet Switches Chapter 1 MSTP Configuration Commands1-31Examples# Configure Ethernet 1/0/3 as an edge port. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] stp interface Ethernet 1/0/3 edged-port enable1.1.26 stp interface loop-protectionSyntaxstp interface interface-list loop-protectionundo stp interface interface-list loop-protectionViewSystem viewParametersinterface-list: Ethernet port list. You can specify multiple Ethernet ports by providing thisargument in the form of interface-list = { interface-type interface-number [ tointerface-type interface-number ] } &<1-10>, where &<1-10> means that you canprovide up to 10 port indexes/port index ranges for this argument.DescriptionUse the stp interface loop-protection command to enable the loop guard function insystem view.Use the undo stp interface loop-protection command to restore the default state ofthe loop guard function in system view.The loop guard function is disabled by default.Related commands: stp loop-protection.Caution:With the loop guard function enabled, the root guard function and the edge portconfiguration are mutually exclusive.Examples# Enable the loop guard function for Ethernet 1/0/1. system-view
