Command Manual (For Soliton) – ACLH3C S3100 Series Ethernet Switches Chapter 1 ACL Configuration Commands1-4DescriptionUse the display acl command to display the configuration information of a specified orall ACLs.Note that if you specify the match order of an ACL when configuring the ACL, thiscommand will display the rules of the ACL in the specified match order.Examples# Display information about ACL 2000. display acl 2000Basic ACL 2000, 1 ruleAcl's step is 1rule 0 permit source 1.1.1.1 0Table 1-1 Description on the fields of the display acl commandField DescriptionBasic ACL 2000 The displayed information is about the basic ACL 2000.1 rule The ACL includes one rule.Acl's step is 1 The step for rules of this ACL is 1.1.1.4 display acl remaining entrySyntaxdisplay acl remaining entryViewAny viewParameterNoneDescriptionUse the display acl remaning entry command to display information about theremaining ACL resources.According to the output, you can determine the number of resources consumed by acertain type of ACL rules and whether the exhaustion of resources causes the failure toassign ACL rules.Example# Display information about the remaining ACL resources.
