Command Manual (For Soliton) – 802.1x-System GuardH3C S3100 Series Ethernet Switches Chapter 1 802.1x Configuration Commands1-161.1.12 dot1x retrySyntaxdot1x retry max-retry-valueundo dot1x retryViewSystem viewParametermax-retry-value: Maximum number of times that a switch sends authentication requestpackets to a user. This argument ranges from 1 to 10.DescriptionUse the dot1x retry command to specify the maximum number of times that a switchsends authentication request packets to a user.Use the undo dot1x retry command to revert to the default value.By default, a switch sends authentication request packets to a user for up to 2 times.After a switch sends an authentication request packet to a user, it sends anotherauthentication request packet if it does not receive response from the user after aspecific period of time. If the switch still receives no response when the configuredmaximum number of authentication request transmission attempts is reached, it nolong sends an authentication request packet to the user. This command applies to allports.Related command: display dot1x.Example# Specify the maximum number of times that the switch sends authentication requestpackets to be 9. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] dot1x retry 91.1.13 dot1x retry-version-maxSyntaxdot1x retry-version-max max-retry-version-valueundo dot1x retry-version-max
