Command Manual (For Soliton) – System Maintenance and DebuggingH3C S3100 Series Ethernet SwitchesChapter 1 Basic SystemConfiguration and DebuggingCommands1-10For information about the terminal monitor command, refer to Information CenterCommand.Example# Enable IP packet debugging of the IP module. debugging ip packet display debuggingIP packet debugging is on1.3.2 display diagnostic-informationSyntaxdisplay diagnostic-informationViewAny viewParameterNoneDescriptionUse the display diagnostic-information command to display system diagnosticinformation, or save system diagnostic information to a file with the extension .diag inthe Flash memory.Example# Save system diagnostic information to the file default.diag. display diagnostic-informationThis operation may take a few minutes, continue?[Y/N]yDiagnostic-information is saved to Flash or displayed(Y=saveN=display)?[Y/N]yPlease input the file name(*.diag)[flash:/default.diag]:The file is already existing, overwrite it? [Y/N]y% Output information to file: flash:/default.diag.Please wait......# Display the diagnostic information of the system. display diagnostic-informationThis operation may take a few minutes, continue?[Y/N]y
