H3C S3100 Series Command Manual

Also see for S3100 Series: Configuration Operation manual Installation manual Command manual Command manual

Contents

H3C S3100 Series Command Manual Manual pdf 510 page image

Command Manual (For Soliton) – ARPH3C S3100 Series Ethernet Switches Chapter 1 ARP Configuration Commands1-9ViewSystem viewParametersaging-time: Aging time (in minutes) of the dynamic ARP entries. This argument rangesfrom 1 to 1,440.DescriptionUse the arp timer aging command to configure the aging time for dynamic ARPentries.Use the undo arp timer aging command to restore the default.By default, the aging time for dynamic ARP entries is 20 minutes.Related commands: display arp timer aging.Examples# Configure the aging time to be 10 minutes for dynamic ARP entries. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] arp timer aging 101.1.12 display arpSyntaxdisplay arp [ dynamic | static | ip-address ]ViewAny viewParametersdynamic: Displays dynamic ARP entries.static: Displays static ARP entries.ip-address: IP address. ARP entries containing the IP address are to be displayed.DescriptionUse the display arp command to display specific ARP entries.If you execute this command with no keyword/argument specified, all the ARP entriesare displayed.Related commands: arp static, reset arp.