Command Manual (For Soliton) – LoginH3C S3100 Series Ethernet Switches Chapter 1 Login Commands1-88:UUUU X5 character mode users. (U)8 UI never used. (X)5 total UI in useTable 1-2 Description on the fields of the display user-interface summary commandField DescriptionUser interface type User interface type: AUX or VTY0:UXXX XXXX/8:UUUU X0 and 8 represent the least absolutenumber for AUX user interfaces and VTYuser interfaces. “U” and “X” indicate theusage state of an interface: U indicatesthat the corresponding user interface isused; X indicates that the correspondinguser interface is idle. The total number ofUs and Xs is the total number of userinterfaces that are available.character mode users. (U) The number of current users, that is, thenumber of UsUI never used. (X) The number of user interfaces not beingused currently, that is, the number of Xstotal UI in use.The total number of user interfacesbeing used currently, that is, the totalnumber of users currently logging in tothe switch successfully1.1.6 display usersSyntaxdisplay users [ all ]ViewAny viewParametersall: Displays the user information about all user interfaces.DescriptionUse the display users command to display the user information about user interfaces.If you do not specify the all keyword, only the user information about the current userinterface is displayed.
