Command Manual (For Soliton) – DLDPH3C S3100 Series Ethernet Switches Chapter 1 DLDP Configuration Commands1-6Use the dldp reset command to reset the DLDP status of the current port disabled byDLDP.After the dldp reset command is executed, the DLDP status of a port changes fromdisable to active and DLDP restarts to detect the link status of the fiber cable or coppertwisted pair.Related command: dldp and dldp unidirectional-shutdown.Example# Reset the DLDP status of all the ports disabled by DLDP. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] dldp reset1.1.6 dldp unidirectional-shutdownSyntaxdldp unidirectional-shutdown { auto | manual }undo dldp unidirectional-shutdownViewSystem viewParameterauto: Disables automatically the corresponding port when DLDP detects anunidirectional link or finds in the enhanced mode that the peer port is down.manual: Prompts the user to disable manually the corresponding port when DLDPdetects an unidirectional link or finds in the enhanced mode that the peer port is down.After the port is disabled, it can only send and receive Recover Probe packets andRecover Echo packets.DescriptionUse the dldp unidirectional-shutdown command to set the DLDP handling mode forunidirectional links.Use the undo dldp unidirectional-shutdown command to restore the default DLDPhandling mode.By default, the DLDP handling mode after a unidirectional link is detected is auto.Related command: dldp work-mode.
