Command Manual (For Soliton) – Information CenterH3C S3100 Series Ethernet SwitchesChapter 1 Information Center ConfigurationCommands1-12 system-viewSystem View: return to User View with Ctrl+Z.[Sysname] info-center loghost source Vlan-interface 11.1.12 info-center monitor channelSyntaxinfo-center monitor channel { channel-number | channel-name }undo info-center monitor channelViewSystem viewParameterchannel-number: Channel number, ranging from 0 to 9, corresponding to the 10channels of the system.channel-name: Channel name, by default, the name of channel 0 to channel 9 is (in turn)console, monitor, loghost, trapbuffer, logbuffer, snmpagent, channel6, channel7,channel8, channel9.DescriptionUse the info-center monitor channel command to set the channel through whichinformation is output to user terminals.Use the undo info-center monitor channel command to restore the default channelthrough which information is output to user terminals.By default, output of system information to the monitor is enabled with a default channelname of monitor and a default channel number of 1.This command works only when the information center is enabled.Related command: info-center enable, display info-center.Example# Set the system to output information to user terminals through channel 0. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] info-center monitor channel 01.1.13 info-center snmp channelSyntaxinfo-center snmp channel { channel-number | channel-name }
