Command Manual (For Soliton) – Port Basic ConfigurationH3C S3100 Series Ethernet SwitchesChapter 1 Port Basic ConfigurationCommands1-39Use the undo storm-constrain enable command to disable log/trap information frombeing output when traffic received on the port exceeds the upper threshold or fallsbelow the lower threshold.By default, log/trap information is output when traffic received on the port exceeds theupper threshold or falls below the lower threshold.Related commands: display storm-constrain, storm-constrain.Examples# Disable log information from being output when traffic received on Ethernet 1/0/1exceeds the upper threshold or falls below the lower threshold. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] interface Ethernet 1/0/1[Sysname-Ethernet1/0/1] undo storm-constrain enable log1.1.35 storm-constrain intervalSyntaxstorm-constrain interval interval-valueundo storm-constrain intervalViewSystem viewParametersinterval-value: Interval to collect traffic statistics, in the range of 1 to 300 (in seconds).DescriptionUse the storm-constrain interval command to set the interval to collect trafficstatistics.Use the undo storm-constrain interval command to restore the default setting.By default, the interval is 10 seconds.Related commands: display storm-constrain, storm-constrain.Examples# Set the interval to collect traffic statistics to 2 seconds. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] storm-constrain interval 2
