Command Manual (For Soliton) – IP Address-IP PerformanceH3C S3100 Series Ethernet SwitchesChapter 1 IP Address ConfigurationCommands1-1Chapter 1 IP Address Configuration Commands1.1 IP Address Configuration Commands1.1.1 display ip interfaceSyntaxdisplay ip interface [ interface-type interface-number ]ViewAny viewParametersinterface-type interface-number: Specifies an interface by its type and number.DescriptionUse the display ip interface command to display information about a specified or allLayer 3 interfaces.If no argument is specified, information about all Layer 3 interfaces is displayed.Examples# Display information about VLAN-interface 1. display ip interface Vlan-interface 1Vlan-interface1 current state :UPLine protocol current state :UPInternet Address is 192.168.0.39/24 PrimaryBroadcast address : 192.168.0.255The Maximum Transmit Unit : 1500 bytesIP packets input number: 9678, bytes: 475001, multicasts: 7IP packets output number: 8622, bytes: 391084, multicasts: 0TTL invalid packet number: 0ICMP packet input number: 0Echo reply: 0Unreachable: 0Source quench: 0Routing redirect: 0Echo request: 0Router advert: 0Router solicit: 0
