Command Manual (For Soliton) – IP Address-IP PerformanceH3C S3100 Series Ethernet SwitchesChapter 2 IP Performance ConfigurationCommands2-2Table 2-1 Description on the fields of the display fib commandField DescriptionFlagFlags:U: A route is up and available.G: Gateway routeH: Local host routeB: Blackhole routeD: Dynamic routeS: Static routeR: Rejected routeE: Multi-path equal-cost routeL: Route generated by ARP or ESISDestination/Mask Destination address/mask lengthNexthop Next hop addressTimeStamp TimestampInterface Forwarding interface2.1.2 display fib ip-addressSyntaxdisplay fib ip-address1 [ { mask1 | mask-length1 } [ ip-address2 { mask2 |mask-length2 } | longer ] | longer ]ViewAny viewParametersip-address1, ip-address2: Destination IP addresses, in dotted decimal notation.ip-address1 and ip-address2 together define an address range. The FIB entries in thisaddress range will be displayed.mask1, mask2: Subnet masks, in dotted decimal notation.mask-length1, mask-length2: Length of the subnet masks, the number of consecutiveones in the masks, in the range of 0 to 32.longer: Displays the FIB entries matching the specified address/mask and havingmasks longer than or equal to the specified mask. If no masks are specified, FIB entriesthat match the natural network address and have the masks longer than or equal to thenatural mask will be displayed.
