Command Manual (For Soliton) – QoS-QoS ProfileH3C S3100 Series Ethernet Switches Chapter 1 QoS Commands1-91.1.9 display qos-interface traffic-limitSyntaxdisplay qos-interface { interface-type interface-number | unit-id } traffic-limitViewAny viewParameterinterface-type interface-number: Specifies the type and number of a port, for which thetraffic policing configuration information is to be displayed.unit-id: Unit ID, which is fixed to 1. With this argument specified, the traffic policingconfiguration of all the ports on the device is displayed.DescriptionUse the display qos-interface traffic-limit command to display the traffic policingconfiguration of a port or all the ports on the device. This command also displays thetraffic policing statistics.Related command: traffic-limit.Example# Display the traffic policing configuration and the corresponding statistics on Ethernet1/0/1. display qos-interface Ethernet 1/0/1 traffic-limitEthernet1/0/1: traffic-limitInbound:Matches: Acl 2001 rule 0 runningTarget rate: 128 KbpsConform action: remark-cos videoExceed action: dropmeter-statistic running12 byte outprofile24 byte inprofileRefer to Table 1-1 for the description on the output fields.1.1.10 display qos-interface traffic-prioritySyntaxdisplay qos-interface { interface-type interface-number | unit-id } traffic-priority
