Command Manual (For Soliton) – Port Basic ConfigurationH3C S3100 Series Ethernet SwitchesChapter 1 Port Basic ConfigurationCommands1-15For the two ports forming a combo port, the one in active state is currently enabled andthe one in inactive state is currently disabled. You can refer to the shutdown commandto change the state of the two ports.Note:For information about combo port, refer to H3C S3100 Series Ethernet SwitchInstallation Manual.1.1.9 display storm-constrainSyntaxdisplay storm-constrain [ interface interface-type interface-number ] [ | { begin |exclude | include } regular-expression ]ViewAny viewParametersinterface-type: Port type.interface-number: Port number.|: Uses a regular expression to filter the output configuration information.begin: Displays the configurations that begin with the string specified byregular-expression.exclude: Displays the configurations that do not contain the string specified byregular-expression.include: Displays the configurations that contain the string specified byregular-expression.regular-expression: Regular expression.DescriptionUse the display storm-constrain command to display the storm controlconfigurations.Examples# Display the storm control configurations. display storm-constrainFlow Statistic Interval: 5(second)
