Command Manual (For Soliton) – VLAN-VPNH3C S3100 Series Ethernet Switches Chapter 2 Selective QinQ Configuration Commands2-3Examples# Specify to add VLAN 20 tag as the outer tags to the packets with their inner VLAN IDsbeing 2 through 14. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] vlan-vpn vid 20[Sysname-vid-20] raw-vlan-id inbound 2 to 142.1.3 vlan-vpn selective enableSyntaxvlan-vpn selective enableundo vlan-vpn selective enableViewEthernet port viewParameterNoneDescriptionUse the vlan-vpn selective enable command to enable the selective QinQ feature ona port. With the selective QinQ feature enabled, packets carrying specific inner VLANtags are tagged with specific outer VLAN tags according to the VLAN tag mapping rulesdefined.Use the undo vlan-vpn selective enable command to disable the selective QinQfeature.By default, the selective QinQ feature is disabled on a port.Related commands: vlan-vpn vid, raw-vlan-id inbound.Example# Enable the selective QinQ feature on Ethernet 1/0/1. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] interface Ethernet 1/0/1[Sysname-Ethernet1/0/1] vlan-vpn selective enable
