Command Manual (For Soliton) – DLDPH3C S3100 Series Ethernet Switches Chapter 1 DLDP Configuration Commands1-7Example# Configure DLDP to shut down the corresponding port on detecting a unidirectionallink. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] dldp unidirectional-shutdown auto1.1.7 dldp work-modeSyntaxdldp work-mode { enhance | normal }undo dldp work-modeViewSystem viewParameterenhance: Configures DLDP to work in enhanced mode. In this mode, DLDP detectswhether neighbors exist when neighbor tables are aging.normal: Configures DLDP to work in normal mode. In this mode, DLDP does not detectwhether neighbors exist when neighbor tables are aging.DescriptionUse the dldp work-mode command to set the DLDP operating mode.Use the undo dldp work-mode command to restore the default DLDP operatingmode.By default, DLDP works in normal mode.Note:z When DLDP works in normal mode, the system can identify only the unidirectionallinks caused by fiber cross-connection.z When the DLDP protocol works in enhanced mode, the system can identify twotypes of unidirectional links: one is caused by fiber cross-connection and the other iscaused by one fiber being not connected or being disconnected.Example# Configure DLDP to work in enhanced mode.
