Command Manual (For Soliton) – VLANH3C S3100 Series Ethernet Switches Chapter 1 VLAN Configuration Commands1-19Field DescriptionSTATEThe state of the MAC-to-VLAN mapping, which can be:z S, indicating that the MAC-to-VLAN mapping is configuredstatically.z D, indicating that the MAC-to-VLAN mapping is createdautomatically during authentication.z S&D, indicating that the MAC-to-VLAN mapping is createdboth statically and dynamically1.3.3 mac-vlan mac-addressSyntaxmac-vlan mac-address mac-addr vlan vlan-id [ priority priority ]undo mac-vlan { all | mac-address mac-addr | vlan vlan-id }ViewSystem viewParametersmac-addr: Specifies a MAC address.vlan vlan-id: Specify a VLAN ID, in the range of 1 to 4094.priority priority: Specify an 802.1p priority for the MAC address, in the range of 0 to 7.The default is 0.all: Removes all the static MAC-to-VLAN mappings.DescriptionUse the mac-vlan mac-address command to map a MAC address to a VLAN and setits 802.1p priority.Use the undo mac-vlan command to remove the mapping.Examples# Map MAC address 000f-e201-0001 to VLAN 100 and set its 802.1p priority to 7. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] mac-vlan mac-address 000f-e201-0001 vlan 100 priority 71.3.4 mac-vlan enableSyntaxmac-vlan enable
