Command Manual (For Soliton) – ARPH3C S3100 Series Ethernet Switches Chapter 1 ARP Configuration Commands1-6Examples# Set the maximum ARP packet receiving rate on Ethernet 1/0/11 to 100 pps. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] interface ethernet 1/0/11[Sysname-Ethernet1/0/11] arp rate-limit enable[Sysname-Ethernet1/0/11] arp rate-limit 1001.1.8 arp rate-limit enableSyntaxarp rate-limit enableundo arp rate-limit enableViewEthernet port viewParametersNoneDescriptionUse the arp rate-limit enable command to enable the ARP packet rate limit function onthe port, that is, to limit the rate of ARP packets passing through the port. If a rate (themaximum ARP packet rate is 15 pps by default) is specified, exceeding ARP packetswill be discarded.Use the undo arp rate-limit enable command to disable the ARP packet rate limitfunction on the port.By default, the ARP packet rate limit function is disabled, that is, ARP packet rate is notlimited on a port.Examples# Enable the ARP packet rate limit function on Ethernet 1/0/11. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] interface Ethernet 1/0/11[Sysname-Ethernet1/0/11] arp rate-limit enable
