Command Manual (For Soliton) – Link AggregationH3C S3100 Series Ethernet SwitchesChapter 1 Link Aggregation ConfigurationCommands1-8Parameteragg-id: Aggregation group ID, in the range of 1 to 28.agg-name: Aggregation group name, a string of 1 to 32 characters.DescriptionUse the link-aggregation group description command to set a description for anaggregation group.Use the undo link-aggregation group description command to remove thedescription of an aggregation group.Note:If you have saved the current configuration with the save command, after systemreboot, the configuration concerning manual and static aggregation groups and theirdescriptions still exists, but that of the dynamic aggregation groups and theirdescriptions gets lost.You can use the display link-aggregation verbose command to check theconfiguration result.Example# Set the description "abc" for aggregation group 1. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] link-aggregation group 1 description abc1.1.9 link-aggregation group modeSyntaxlink-aggregation group agg-id mode { manual | static }undo link-aggregation group agg-idViewSystem viewParameteragg-id: Aggregation group ID, in the range of 1 to 28.manual: Creates a manual aggregation group.static: Creates a static aggregation group.
