Yamaha FL200A Owner's Manual

Also see for F200A: Rigging guide Supplementary service manual

4-1GBEMU01868¯SPECIFICATIONSModelItem Unit F200AETDIMENSIONSOverall length mm (in.) 892 (35.1)Overall width mm (in.) 634 (25.0)Overall height X/U mm (in.) 1,805 (71.1)/–Transom height X/U mm (in.) 643 (25.3)/–Weight X/U kg (lb.) 269 (593)/–PERFORMANCEFull throttle operating range r/min 5,000–6,000Maximum output kW (HP) @ r/min 147.1 @ 5,500Idling speed (in neutral) r/min 650–750ENGINEType 4-stroke, DOHC, V6Displacement cm3 (cu.in.) 3,352 (204.54)Bore × stroke mm (in.) 94.0 × 80.5 (3.70 × 3.17)Ignition system TCI systemSpark plug NGK LFR5A-11Spark plug gap mm (in.) 1.0–1.1 (0.039–0.043)Control system Remote controlStarting system Electric startValve clearance (cold engine) IN mm (in.) 0.17–0.23 (0.007–0.009)EX mm (in.) 0.31–0.37 (0.012–0.015)BatteryMin. cold cranking amps (CCA/EN) amps at -18°C (-0.4°F) 711Min. rated capacity (20HR/IEC) A·h 100Alternator output V-A (W) 12-45Starting carburetion system Electronic fuel injectionDRIVE UNITGear positions Forward-Neutral-ReverseGear ratio 2.00 (30/15)Trim and tilt system Power trim and tiltPropeller mark T/MFUEL AND OILRecommended fuel Regular unleaded gasolineR.O.N. Minimum 90Fuel tank capacity L (US gal, Imp gal) —Recommended engine oil 4-stroke motor oilAPI SE, SF, SG, SH, SJSAE 10W-30, 10W-40Engine oil capacity (excluding oil filter) L (US qt, Imp qt) 5.8 (6.13, 5.1)(including oil filter) L (US qt, Imp qt) 6.0 (6.34, 5.3)Recommended gear oil Hypoid gear oil (SAE90)Gear oil capacity cm3 (US oz, Imp oz) 1,150 (38.88, 40.56)TIGHTENING TORQUESpark plug N·m (kgf·m, lb·ft) 25 (2.5, 18)Propeller nut N·m (kgf·m, lb·ft) 55 (5.5, 40)Engine oil drain bolt N·m (kgf·m, lb·ft) 27 (2.7, 20)Engine oil filter N·m (kgf·m, lb·ft) 18 (1.8, 13)