Chapter 18 Gate Drive Unit (GDU2PHV2)MC9S12ZVMB Family Reference Manual Rev. 1.3584 NXP Semiconductors18.3.2.3 GDU Interrupt Enable Register (GDUIE)18.3.2.4 GDU Desaturation Error Flag Register (GDUDSE)Module Base + 0x0002 Access: User read write (1)1. Read: AnytimeWrite: Anytime7 6 5 4 3 2 1 0R 0 0 0 0GOCIE0 GDSEIE GHHDIE GLVLSIEWReset 0 0 0 0 0 0 0 0= UnimplementedFigure 18-5. GDU2PH Interrupt Enable Register (GDUIE)Table 18-4. GDUIE Register Field DescriptionsField Description3GOCIE0GDU Overcurrent Interrupt Enable — Enables overcurrent interrupt.0 No interrupt will be requested if the flag GOCIF0 in the GDUF register is set1 Interrupt will be requested if the flag GOCIF0 in the GDUF register is set2GDSEIEGDU Desaturation Error Interrupt Enable — Enables desaturation error interrupt on low-side or high-sidedrivers0 No interrupt will be requested if any of the flags in the GDUDSE register is set1 Interrupt will be requested if any of the flags in the GDUDSE register is set1GHHDIEGDU High GHD Interrupt Enable — Enables the high GHD interrupt.0 No interrupt will be requested whenever GHHDIF flag is set1 Interrupt will be requested whenever GHHDIF flag is set0GLVLSIEGDU Low VLS Interrupt Enable — Enables the interrupt which indicates low VLS supply0 No interrupt will be requested whenever GLVLSIF flag is set1 Interrupt will be requested whenever GLVLSIF flag is setModule Base + 0x0003 Access: User read/write (1)1. Read: AnytimeWrite: Anytime, write 1 to clear7 6 5 4 3 2 1 0R 0 0GDHSIF[1:0]0 0GDLSIF[1:0]WReset 0 0 0 0 0 0 0 0= UnimplementedFigure 18-6. GDU2PH Desaturation Error Flag Register (GDUDSE)
