FD 100/320Gbps NT and FX NT IHub Services Guide Services OverviewIssue: 13 3HH-11985-AAAA-TQZZA 101Table 46 describes the command output fields.Table 46 Show Service SDP Command Output Fields3.17.6.4 sdp-usingParameters sdp-id — The SDP ID for which to display information.Default:All SDPs.Values: 1 — 17407far-end ip-address — Displays only SDPs matching with the specified far-end IP address.Default: SDPs with any far-end IP address.detail — Displays detailed SDP information.Default: SDP summary output.Label DescriptionSDP Id The SDP identifier.Adm MTU The desired largest service frame size (in octets) that can be transmitted through thisSDP to the far-end router, without requiring the packet to be fragmented.Opr MTU The actual largest service frame size, in octets. that can be transmitted through thisSDP to the far-end router, without requiring the packet to be fragmented.IP address Specifies the IP address of the remote end of the GRE or MPLS tunnel defined by thisSDP.AdmAdmin StateThe desired state of the SDP.OprOper StateThe operating state of the SDP.Deliver The type of delivery used by the SDP: MPLS.Flags Specifies all the conditions that affect the operating status of this SDP.SignalSignalingThe signaling protocol used to obtain the ingress and egress labels used in framestransmitted and received on the SDP.Last Status Change The time of the most recent operating status change to this SDP.Last Mgmt Change The time of the most recent management-initiated change to this SDP.Number of SDPs The total number of SDPs displayed according to the criteria specified.Associated LSP List A list of LSPs used to reach the far-end router displays. All the LSPs in the list mustterminate at the IP address specified in the Far End field.Item Description(2 of 2)
