FD 100/320Gbps NT and FX NT IHub Services Guide Services OverviewIssue: 13 3HH-11985-AAAA-TQZZA 893.17.4.5 mhf-creationTable 21 mhf-creation command3.17.4.6 ccm-intervalTable 22 ccm-interval commandParameters bridge-id - Specifies the bridge ID for the domain association.Values: 1...2147483647Item Description(2 of 2)Item DescriptionSyntax mhf-creation {default | none | explicit}no mhf-creationContext configure>eth-cfm>domain>association>bridge-identifierDescription This command determines whether to allow automatic MIP creation for the MAThe no form of the command disables automatic MIP creation.Parameters default: Specifies that MHFs can be created for this VID only on bridge ports through whichthis VID can pass without the requirement for a MEP at some lower MA level.none: Specifies that no MHFs can be created for this VID.explicit: Specifies that MHFs can be created for this VID only on bridge ports through whichthis VID can pass, and only if a MEP is created at some lower MA level. There must be at leastone lower level MEP provisioned on the same SAP or SDP.Item DescriptionSyntax ccm-interval intervalno ccm-intervalContext configure>eth-cfm>domain>associationDescription This command configures the CCM transmission interval for all MEPs in the association.The no form of the command reverts the value to the default.Default 10 seconds(1 of 2)
