FD 100/320Gbps NT and FX NT IHub Services Guide Internet Enhanced ServiceIssue: 13 3HH-11985-AAAA-TQZZA 3616.7.2 Configuring IES Interface ParametersThe following example displays an IES configuration with interface parameters:A:ALA-48>configure>service>ies>interface# info----------------------------------------------address 10.1.1.1/24sap nt:sfp:1:50 createingressexitegressexitexit----------------------------------------------A:ALA-48>configure>service>ies>interface#6.7.3 Configuring SAP ParametersA SAP is a combination of a port and encapsulation parameters which identifies theservice access point on the interface and within the router. Each SAP must be uniquewithin a router.Filter policies are configured in the configure>filter context and must be explicitlyapplied to a SAP. There are no default filter policies.Refer to IES Services CLI Command Reference for CLI syntax.This example displays an IES SAP configuration.*A:ALA-A>configure>service>ies>interface# info----------------------------------------------address 10.10.36.2/24sap lt:1/1/5:0 createingressegressexitexit----------------------------------------------*A:ALA-A>configure>service>ies>interface#6.8 Service Management TasksThis section discusses the following service management tasks:• Modifying IES Service Parameters• Deleting an IES Service• Disabling an IES Service• Re-enabling an IES Service
