Virtual Private LAN Service274FD 100/320Gbps NT and FX NT IHub Services Guide3HH-11985-AAAA-TQZZA Issue: 135.16.2.40 storm-controlTable 165 storm-control command5.16.2.41 bgpTable 166 bgp commandDescription This command enables and disables user to user communication for a v-VPLS service. It doesnot apply to m-VPLS. When enabled, user to user traffic is permitted between users on distinctSAPs. The user side relates to v-VPLS SAPs constructed on residential ports. User-to-usercommunication for users situated on the same SAP is anyway not possible. Network siderelates to v-VPLS SAPs constructed on regular ports. Network Ports (including subtendingISAM ports) are created in regular mode. If the port is later assigned to a sub-tending NE, theport can be changed to residential in the port extension table, and user-to-user communicationcan be enabled in the v-VPLS instance.This parameter can be invoked at any point in time.Default no user-user-comItem Description(2 of 2)Item DescriptionSyntax storm-controlno storm-controlContext configure>service>vplsconfigure>service>epipeDescription This command enables storm-control rate limiting on a service.Default NoneItem DescriptionSyntax bgpContext configure>service>vplsDescription This command enables the context to configure the BGP related parameters for both BGP ADand BGP VPLS.
