FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Private Routed Network ServiceIssue: 13 3HH-11985-AAAA-TQZZA 4897.10.6.15 time-exceededTable 479 time-exceeded command7.10.6.16 unreachablesTable 480 unreachables commandItem DescriptionSyntax time-exceeded [number seconds]no time-exceededContext configure>service>vprn>interface>ipv6>icmp6Description This command configures the rate for ICMP time-exceeded messages issued on the routerinterface.By default, generation of ICMP time-exceeded messages is enabled at a maximum rate of 100per 10 second time interval.The no form of this command disables the limiting the rate of time-exceeded on the routerinterface.Default time-exceeded 100 10Parameters number — The maximum number of ICMP time-exceeded messages to send. This parametermust be specified with the seconds parameter.Values: 10 — 1000seconds — The time frame in seconds used to limit the number of ICMP time-exceededmessages that can be issued.Values: 1 — 60Item DescriptionSyntax unreachables [number seconds]no unreachablesContext configure>service>vprn>interface>ipv6>icmp6Description This command configures the rate for ICMP host and network destination unreachablemessages issued on the router interface.The unreachables command enables the generation of ICMP destination unreachables on therouter interface. The rate at which ICMP unreachables is issued can be controlled with theoptional number and time parameters by indicating the maximum number of destinationunreachable messages which can be issued on the interface for a given time interval.By default, generation of ICMP destination unreachable messages is enabled at a maximumrate of 10 per 60 second time interval.The no form of this command disables the generation of icmp destination unreachablemessages on the router interface.Default unreachables 100 10(1 of 2)
