FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Private Routed Network ServiceIssue: 13 3HH-11985-AAAA-TQZZA 5497.10.11.12 receiveTable 589 receive command7.10.11.13 sendTable 590 send commandParameters preference — An integer.Values: 1 — 255Default: 100Item Description(2 of 2)Item DescriptionSyntax receive receive-typeno receiveContext configure>service>vprn>ripconfigure>service>vprn>rip>groupconfigure>service>vprn>rip>group>neighborDescription This command configures the type(s) of RIP updates that will be accepted and processed.If both or version-2 is specified, the RIP instance listens for and accepts packets sent to thebroadcast and multicast (224.0.0.9) addresses.If version-1 is specified, the router only listens for and accepts packets sent to the broadcastaddress.This control can be issued at the global, group or interface level. The default behavior acceptsand processes both RIPv1 and RIPv2 messages.The no form of the command resets the type of messages accepted to both.Default no receive — Accepts both formats.Parameters both — Receive RIP updates in either Version 1 or Version 2 format.none — Do not accept and RIP updates.version-1 — Router should only accept RIP updates in Version 1 format.version-2 — Router should only accept RIP updates in Version 2 format.Item DescriptionSyntax send send-typeno send(1 of 2)
