Internet Enhanced Service390FD 100/320Gbps NT and FX NT IHub Services Guide3HH-11985-AAAA-TQZZA Issue: 136.10.7.9 serverTable 360 server command6.10.7.10 source-addressTable 361 source-address command6.10.7.11 icmp6Table 362 icmp6 commandItem DescriptionSyntax server ipv6-address [ipv6-address...(up to 8 maximum)]Context configure>service>ies>interface>ipv6>dhcp6-relayDescription This command specifies a list of servers where requests will be forwarded. The list of serverscan be entered as IP addresses. There must be at least one server specified for DHCP relayto work. If there are multiple servers then the request is forwarded to all of the servers in thelist.A maximum of 8 DHCP servers can be configured.Default No serverParameters ipv6-address — Specify the DHCP server IPv6 address.Item DescriptionSyntax source-address ipv6-addressno source-addressContext configure>service>ies>interface>ipv6>dhcp6-relayDescription This command specifies a source IPv6 address which will be used as the source IPv6 addressin all the relayed DHCPv6 messages. By default all DHCPv6 relay messages will use theoutgoing interface IPv6 address as source address.Default no source-addressParameters ipv6-address — Specify the source IPv6 address.Item DescriptionSyntax icmp6Context configure>service>ies>interface>ipv6Description This command configures ICMPv6 for the interface.
