FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Private Routed Network ServiceIssue: 13 3HH-11985-AAAA-TQZZA 5097.10.9.21 ibgp-multipathTable 518 ibgp-multipath command7.10.9.22 importTable 519 import commandDefault 90 secondsParameters seconds — The hold-time, in seconds, expressed as a decimal integer. A value of 0 indicatesthe connection to the peer is up permanently.Values: 0, 3 — 65535Item Description(2 of 2)Item DescriptionSyntax [no] ibgp-multipathContext configure>service>vprn>bgpDescription This command defines the type of IBGP multipath to use when adding BGP routes to the routetable if the route resolving the BGP nexthop offers multiple nexthops.The no form of the command resets the IBGP multipath feature to the default value(load-balance).Default ibgp-multipath load-balanceItem DescriptionSyntax import policy [policy...]no importContext configure>service>vprn>bgpconfigure>service>vprn>bgp>groupconfigure>service>vprn>bgp>group>neighborDescription This command specifies the import policies to be used to control routes advertised to BGPneighbors. Route policies are configured in the configure>router>policy-options context.When multiple policy names are specified, the policies are evaluated in the order they arespecified. A maximum of five (5) policy names can be specified. The first policy that matchesis applied.The no form of this command removes all route policy names from the import list.Default no import — BGP accepts all routes from configured BGP neighbors. Import policies can beused to limit or modify the routes accepted and their corresponding parameters and metrics.Parameters policy — A route policy statement name.
