FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Private Routed Network ServiceIssue: 13 3HH-11985-AAAA-TQZZA 5157.10.9.29 min-as-originationTable 526 min-as-origination command7.10.9.30 min-route-advertisementTable 527 min-route-advertisement commandItem DescriptionSyntax min-as-origination secondsno min-as-originationContext configure>service>vprn>bgpconfigure>service>vprn>bgp>groupconfigure>service>vprn>bgp>group>neighborDescription This command configures the minimum interval, in seconds, at which a path attribute,originated by the local router, can be advertised to a peer.This configuration parameter can be set at three levels: global level (applies to all peers), grouplevel (applies to all peers in peer-group) or neighbor level (only applies to specified peer). Themost specific value is used.The no form of the command used at the global level reverts to default.The no form of the command used at the group level reverts to the value defined at the globallevel.The no form of the command used at the neighbor level reverts to the value defined at thegroup level.Default 15 secondsParameters seconds — The minimum path attribute advertising interval in seconds, expressed as adecimal integer.Values: 2 — 255Item DescriptionSyntax min-route-advertisement secondsno min-route-advertisementContext configure>service>vprn>bgpconfigure>service>vprn>bgp>groupconfigure>service>vprn>bgp>group>neighborDescription This command configures the minimum interval, in seconds, at which a prefix can beadvertised to a peer.This configuration parameter can be set at three levels: global level (applies to all peers), grouplevel (applies to all peers in peer-group) or neighbor level (only applies to specified peer). Themost specific value is used.The no form of the command reverts to default values.Default 30 seconds(1 of 2)
