FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Private Routed Network ServiceIssue: 13 3HH-11985-AAAA-TQZZA 5077.10.9.17 groupTable 514 group command7.10.9.18 neighborTable 515 neighbor commandItem DescriptionSyntax group [name]no groupContext configure>service>vprn>bgpDescription This command creates a context to configure a BGP peer group.The no form of the command deletes the specified peer group and all configurationsassociated with the peer group. The group must be shutdown before it can be deleted.Default None — No peer groups are defined.Parameters name — The peer group name. Allowed values is a string up to 32 characters long composedof printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, etc.),the entire string must be enclosed within double quotes.Item DescriptionSyntax [no] neighborContext configure>service>vprn>bgp>groupconfigure>service>vprn>bgp>group>neighborDescription This command creates a BGP peer/neighbor instance within the context of the BGP group.This command can be issued repeatedly to create multiple peers and their associatedconfiguration.The no form of the command is used to remove the specified neighbor and the entireconfiguration associated with the neighbor. The neighbor must be administratively shutdownbefore attempting to delete it. If the neighbor is not shutdown, the command will not result inany action except a warning message on the console indicating that neighbor is stilladministratively up.Default no neighbor
