FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Private LAN ServiceIssue: 13 3HH-11985-AAAA-TQZZA 3175.16.6.14 stargTable 248 starg command5.16.6.15 versionTable 249 static commandParameters ip-address — Specifies the IPv4 unicast address.Item Description(2 of 2)Item DescriptionSyntax [no] stargContext configure>service>vpls>igmp-snooping>static>groupconfigure>service>vpls>sap>igmp-snooping>static>groupconfigure>service>mesh-sdp>igmp-snooping>static>groupconfigure>service>spoke-sdp>igmp-snooping>static>groupDescription This command adds a static (*,G) entry. This command can only be enabled if no existingsource addresses for this group are specified.Use the no form of the command to remove the starg entry from the configuration.Item DescriptionSyntax version version[no]versionContext configure>service>vpls>sap>igmp-snoopingDescription This command specifies the IGMP version. If routers run different versions of IGMP, they willnegotiate the lowest common version of IGMP that is supported by hosts on their subnet andoperate in that version. For IGMP to function correctly, all routers on a LAN should beconfigured to run the same version of IGMP on that LAN.For IGMPv3, note that a multicast router that is also a group member performs both parts ofIGMPvParameters version — Specifies the IGMP version number.Values 1, 2, 3
