FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Private Routed Network ServiceIssue: 13 3HH-11985-AAAA-TQZZA 4997.10.9 BGP Commands7.10.9.1 bgpTable 498 bgp command7.10.9.2 advertise-inactiveTable 499 advertise-inactive commandDescription This command display information about a particular GRE tunnel or all GRE tunnels.Count option displays the number of GRE tunnels in the system.Parameters gre-tunnel-name — Specifies the name of a GRE tunnel.Item Description(2 of 2)Item DescriptionSyntax [no] bgpContext service>vprnDescription This command enables the BGP protocol with the VPRN service.The no form of the command disables the BGP protocol from the given VPRN service.Default no bgpItem DescriptionSyntax [no] advertise-inactiveContext configure>service>vprn>bgpconfigure>service>vprn>bgp>groupconfigure>service>vprn>bgp>group>neighborDescription This command enables or disables the advertising of inactive BGP routers to other BGP peers.By default, BGP only advertises BGP routes to other BGP peers if a given BGP route is chosenby the route table manager as the most preferred route within the system and is active in theforwarding plane. This command allows system administrators to advertise a BGP route eventhough it is not the most preferred route within the system for a given destination.Default no advertise-inactive
