Virtual Private LAN Service278FD 100/320Gbps NT and FX NT IHub Services Guide3HH-11985-AAAA-TQZZA Issue: 135.16.2.47 bgp-adTable 172 bgp-ad command5.16.2.48 pw-template-bindTable 173 pw-template-bind commandDescription This command administratively enables/disables the local BGP VPLS instance. Onde-activation, an MP-UNREACH-NLRI must be sent for the local NLRI.The no form of the command enales the BGP VPLS addressing and the related BGpadvertisement.The associated BGP VPLS MP-REACH-NLRI will be advertised in an update message and thecorresponding received NLRIs must be considered to instantiate the data plane. RT and RDusage is the same as in the BGP AD solution: if the values are not configured here, the valueof the VPLS-id from under the bgp-ad node is used. If VPLS-id value is not configured, the MHsite cannot be activated (that is, no shutdown returns an error). The same applies if aPW-template is not specified under the bgp node.Default shutdownItem Description(2 of 2)Item DescriptionSyntax [no] bgp-adContext configure>service>vplsDescription This command configures BGP auto-discovery.Item DescriptionSyntax pw-template-bind policy-id [split-horizon-group group name]no pw-template-bind policy-idContext configure>service>vpls>bgp(1 of 2)
