Mirror Services614FD 100/320Gbps NT and FX NT IHub Services Guide3HH-11985-AAAA-TQZZA Issue: 138.4 Basic Mirroring ConfigurationDestination mirroring parameters must include at least:• A mirror destination ID (same as the mirror source service ID).• A mirror destination.Mirror source parameters must include at least:• A mirror service ID (same as the mirror destination service ID).• At least one source type (port) specified.The following example displays a sample configuration of a local mirrored servicewhere the source and destinations are on the same device (ALA-A).*A:ALA-A>configure>mirror# info----------------------------------------------mirror-dest 103 createsap lt:2/1/25:0 createexitexitno shutdownexit----------------------------------------------*A:ALA-A>configure>mirror#The following displays the mirror source configuration:*A:ALA-A>debug>mirror-source# show debug mirrordebugmirror-source 103port lt:2/1/24 egress ingressno shutdownexitexit*A:ALA-A>debug>mirror-source# exit8.5 Common Configuration TasksThis section provides a brief overview of the tasks that must be performed toconfigure local mirror services and provides the CLI command syntax. Note that localmirror source and mirror destination components must be configured under the sameservice ID context.Each local mirrored service (Figure 36) (within the same router) requires thefollowing configurations:• Specify mirror destination (SAP).• Specify mirror source (port).
