FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Private Routed Network ServiceIssue: 13 3HH-11985-AAAA-TQZZA 4657.10.2.29 static-routeTable 439 static-route commandItem DescriptionSyntax [no] static-route {ip-prefix/mask | ip-prefix netmask} [preference preference] [metric metric][tag tag] [enable | disable] next-hop {ip-int-name | ip-address} [bfd-enable][no] static-route {ip-prefix/mask | ip-prefix netmask}[preference preference] [metric metric][tag tag] [enable | disable] black-holeContext configure>service>vprnDescription This command creates static route entries for both the network, hybrid, and access routes.When configuring a static route, either next-hop or black-hole must be configured.The no form of the command deletes the static route entry. If a static route needs to beremoved when multiple static routes exist to the same destination, then as many parametersto uniquely identify the static route must be entered.If a static-route command is issued with no cpe-check target but the destinationprefix/netmask and next-hop matches a static route that did have an associated cpe-check, thecpe-check test will be removed from the associated static route.Default No static routes are defined.(1 of 3)
